BLASTLINE Sandblasting/Shot-peening machines feature very special design and performance characteristics.

A BLASTLINE sandblasting/shot-peening machine is a compressed-air unit designed to produce a jet of granular material through the energy created by a compressed air system. A special manual or mechanical gun creates a high efficiency jet to provide a high-quality treatment of the components

A wide range of granular material can be used according to customers' requirements, including the following :

• Quartz sand
• Corundum
• Glass or ceramic beads
• Plastic grains
• Metal shots

The granulated material blown through a Blastline jet will be hereinafter referred to as “abrasvie”
The type of abrasive to be used depends on the surface treatment to be performed. The most common treatments are:

• deoxidation
• paint removing
• cleaning of metal and non-metal surfaces
• butter finish
• roughening to allow anchorage and subsequent layers of material
• hardening
• normalizing of inside tensions
• coverage of marks and defects .
• special finish

Compressed-air sandblasting/shot-peening machines can be delivered in two different models:

1. “vacuum cabinets”
2. “pressure cabinets”