Accessories and optional

Hand-operated/powered rotary tales pull-out carriage-mounted models

P/N	Item	Cabinet model	Diameter mm	Load Kg
2TRE0F	carriage + 3	BLAST 0/F	375	125 max
2TRE1F	carriage + 3	BLAST 1/F	450	125 max
2TRE2F	carriage + 3	BLAST 2/F	675	150 max
2TRE3F	carriage + 3	BLAST 3/F	1000	150 max
2TRE0F3	increase of load capacity + pull-out rotary table	BLAST 0/F		300 max
2TRE0F6	increase of load capacity + pull-out rotary table	BLAST 0/F		300 to 600
2TRE0F9	increase of load capacity + pull-out rotary table	BLAST 0/F		600 to 900
2TRE1F3	increase of load capacity + pull-out rotary table	BLAST 1/F		300 max
2TRE1F6	increase of load capacity + pull-out rotary table	BLAST 1/F		da 300 a 600
2TRE1F9	increase of load capacity + pull-out rotary table	BLAST 1/F		600 to 900
2TRE2F3	increase of load capacity + pull-out rotary table	BLAST 2/F		300 max
2TRE2F6	increase of load capacity + pull-out rotary table	BLAST 2/F		300 to 600
2TRE2F9	increase of load capacity + pull-out rotary table	BLAST 2/F		600 to 900
2TRE3F3	increase of load capacity + pull-out rotary table	BLAST 3/F		300 max
2TRE3F6	increase of load capacity + pull-out rotary table	BLAST 3/F		300 to 600
2TRE3F9	increase of load capacity + pull-out rotary table	BLAST 3/F		600 to 900
2TREB1F	powered rotary table pull-out carriage-mounted model + swing arm	BLAST 1/F	450
2TREB2F	powered rotary table pull-out carriage-mounted model + swing arm	BLAST 2/F	675
2TREB3F	powered rotary table pull-out carriage-mounted model + swing arm	BLAST 3/F	1000

This accessory has been designed for the treatment of very heavy pieces that cannot be handled without adequate mechanical aids.

• outside structure with runways

• runways inside the cabinet

• wheel-mounted sliding carriage complete with rotary table

The movement is hand controlled on both the carriage and the rotary table. The rotating components are mounted on special sealed bearings to ensure long life and efficiency.

The rotary table is complete with one central support and four supports along the edge for proper stability.

Thanks to a special mechanical system, the raceways do not need for a passage to be opened through the door and the edge. This configuration prevents any risk of dust escape during the sandblasting process.

The outside structure is delivered in two different configuration

• Wheel mounted, for ease of handling

• Fixed to the cabinet. In this case, the operator shall pull down the roller table every time he needs to open/close the door.

The accessory described herin can be located on either the right or the left of the cabinet.

Note: The load weight mentioned herein shall be considered as an approximate weight for information only. Upon request, each machine will be provided with special pull-out rotary tables for heavy loads.