|
|||||
 |
|||||
 |
 |
 |
 |
||
|
|||||
 |
|||||
|
|||||
|
S100F
S100C |
S120F
S120C |
|
|
OVERALL DIMENSIONS |
|
|
|
Width |
c.a.
mm. 1300
|
c.a.
mm. 1500
|
|
Elevation |
c.a.
mm. 1200
|
c.a.
mm. 1450
|
|
Depth |
c.a.
mm. 1350
|
c.a.
mm. 1560
|
|
WASH AREA |
|
|
|
Wash tank diameter |
c.a.
mm. 970
|
c.a.
mm. 1170
|
|
Working elevation |
c.a.
mm. 500
|
c.a.
mm. 700
|
|
Basket capacity, maximum |
Kg.
200
|
Kg.
300
|
|
Heating system |
Electrical
|
Electrical
|
|
Installed power |
Kw.
8
|
Kw.
11
|
|
Voltage |
230/400
V.
|
230/400
V.
|
|
HOT-DEOILING TANKS |
|
|
|
Nozzle pressure |
Atm.
2,6
|
Atm.
3
|
|
Cycle time |
Adjustable
|
Adjustable
|
|
Spray capacity of the pump |
Lt./1'
200
|
Lt./1'
220
|
|
tank volume |
Lt.
200
|
Lt.
300
|
|
Pump capacity |
Kw.
1,5
|
Kw.
2,2
|
|
Heating capacity |
Kw.
6
|
Kw.
8
|
TECHNICAL SPECIFICATIONS
Each machine consists of a series of sheet metal panels welded to each other, made from AISI 304 steel, 12/10 thick to form the tank and the cover.
· Loading platform consisting of a radial arrangement and a zinc-plated wire
net basket.
· Stainless steel wire filter mounted at the suction head of the pump.
· Submrged stainless steel-plated resistance
· Spray nozzle arch constiting of zinc-plated seel pipes (“U” arrangement) to
wash each piece thoroughly.·
½” or 1” ball valve for water discharge
Electric panel in conformity to EC regulations, complete with bath
temperature control thermostats, electromechanical wash control
timers, lamps, switches and what else will be necessary to
proper machine functioning and performances..
HEATING SYSTEM
The electrical heating system consists of a submerged electrical steel resistance with intercept thermostat for precise temperature regulation. Steam suction and tank insulation are not required for bath temperatures to 60°
Model S100 C and S120 C include the following characteristics for temperatures in excess of 60°.
• complete thermal insulation
• automatic steam suction
• Basket provided with panels underneath
• Lid lockup key
MACHINE OPERATION
The machine will be complete with rotary basket for the components to be washed.
The wash solution will be continuosly collected by a motor pump from the tank located underneath. Then, a jet of wash solution will be sprayed under pressure by the motor pump from each side against the basket.
CONFORMITY TO EC REGULATIONS
TECHNICAL SPECIFICATIONS
Each machine consists of a series of sheet metal panels welded to each other, made from AISI 304 steel, 12/10 thick to form the tank and the cover.
· Loading platform consisting of a radial arrangement and a zinc-plated wire
net basket.
· Stainless steel wire filter mounted at the suction head of the pump.
· Submrged stainless steel-plated resistance
· Spray nozzle arch constiting of zinc-plated seel pipes (“U” arrangement) to
wash each piece thoroughly.·
½” or 1” ball valve for water discharge
Electric panel in conformity to EC regulations, complete with bath
temperature control thermostats, electromechanical wash control
timers, lamps, switches and what else will be necessary to
proper machine functioning and performances..
HEATING SYSTEM
The electrical heating system consists of a submerged electrical steel resistance with intercept thermostat for precise temperature regulation. Steam suction and tank insulation are not required for bath temperatures to 60°
Model S100 C and S120 C include the following characteristics for temperatures in excess of 60°.
• complete thermal insulation
• automatic steam suction
• Basket provided with panels underneath
• Lid lockup key
MACHINE OPERATION
The machine will be complete with rotary basket for the components to be washed.
The wash solution will be continuosly collected by a motor pump from the tank located underneath. Then, a jet of wash solution will be sprayed under pressure by the motor pump from each side against the basket.
CONFORMITY TO EC REGULATIONS